Mettler Toledo M400 Especificações descarregar pdf (Página 69)

Transmitter Multiparameter M400 69

Printed in Switzerland 52 121 378

12.3 Model / Software Revision

Selecting Model / Software Revision will display the model number, serial number and installed

software revision.

The displayed information is important for any Service call. Press [ENTER] to return to the

normal measurement mode.

12.4 ISM Sensor Info (available when ISM sensor connected)

After plugging in an ISM sensor, the following information about the sensor will be shown in this

menu. Use up and down arrows to scroll in the menu.

Type: Type of sensor (e.g. InPro 3250)

Cal Date: Date of the last adjustment

Serial-No.: Serial number of the connected Sensor

Part-No.: Part number of the connected Sensor

12.5 ISM Sensor Diagnostics (available when ISM sensor connected)

Cal History

The calibration history is stored with a time stamp in the ISM Sensor and is displayed on the

transmitter. The Calibration history offers the following information:

Fact (Factory calibration): This is the original dataset, determined in the factory. This dataset

remains stored in the sensor for reference and cannot be overwritten.

Act (Actual adjustment): This is the actual calibration dataset which is used for the

measurement. This dataset moves to Cal-2 position after the next adjustment.

1. Adj (First adjustment): This is the ﬁrst adjustment after the factory calibration. This dataset

remains stored in the sensor for reference and cannot be overwritten

Cal-1 (last calibration / adjustment): This is the last executed calibration / adjustment. This

dataset moves to Cal-2 and then to Cal-3 when a new calibration / adjustment is performed.

Afterwards, the dataset is not available anymore.

Cal-2 and Cal-3 acting in the same way as Cal-1.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 87 88

Sem comentários

Mettler Toledo M400 Especificações Página 69